Multidimensional assessment of technological capabilities for project management through building information modeling

Authors

  • Erwin Alberto Conrado Ramos Pérez Universidad Nacional “San Luis Gonzaga”. Ica, Perú.

Keywords:

building information modeling, multidimensional assessment, project management, technological capabilities

Abstract

The assessment of BIM capabilities requires distinguishing conceptual knowledge, digital representation, technical interpretation, and technological integration in project management. The objective was to conduct a multidimensional analysis of technological capabilities for digital project management through Building Information Modeling. A methodological exercise was conducted using a quantitative approach, applied orientation, descriptive-comparative scope, and non-experimental design. Fifty simulated records and 24 criteria distributed across four dimensions were used, with responses rated on a five-point Likert scale. Descriptive statistics were calculated, and the Friedman and Wilcoxon tests for related samples were applied, with Holm adjustment and estimation of Kendall’s coefficient of concordance. The overall score reached a mean of 3.30 ± 0.46. Modeling and digital representation obtained the highest score (3.59 ± 0.55), whereas the interpretation and analysis of technical information presented the lowest (3.14 ± 0.68). Differences were identified among the four dimensions (χ² = 24.348; p = 0.000021; W = 0.162). Pairwise comparisons confirmed higher scores for modeling and digital representation than for the other three dimensions, with no significant differences among the latter. The score distribution made it possible to distinguish capabilities associated with digital representation from those related to the understanding, interpretation, and integration of technical information. It is concluded that the procedure enabled the characterization and comparison of four dimensions of technological capabilities, providing a methodological basis for future empirical assessments in undergraduate civil engineering education.

Downloads

Download data is not yet available.

Author Biography

  • Erwin Alberto Conrado Ramos Pérez, Universidad Nacional “San Luis Gonzaga”. Ica, Perú.

    Doctor en Gestión Ambiental. Facultad de Ingeniería Civil.

References

Abanda, F. H., Almukhtar, A., & Austin, M. (2025). Lessons from the virtual delivery of building information modelling modules in the COVID-19 era. Buildings, 15(2), 215. https://doi.org/10.3390/buildings15020215

Ahankoob, A., Abbasnejad, B., & Aranda, M. G. (2025). Building information modelling (BIM) acceptance and learning experiences in undergraduate construction education: A technology acceptance model (TAM) perspective—An Australian case study. Buildings, 15(11), 1804. https://doi.org/10.3390/buildings15111804

Brioso, X., Calderón, H. C., & Fuentes, H. D. (2023). Strategies and virtual tools for teaching building construction to civil engineering undergraduates: A case study. Advances in Building, 7(3), 46-60. Education. https://doi.org/10.20868/abe.2023.3.5205

Del Savio, A. A., Galantini, V. K., Luna, T. A., Salinas, S. J. R., & Vergara, O. M. A. (2024). Embedding building information modelling in the construction area: A case within an undergraduate civil engineering program. International Journal of Engineering Pedagogy, 14(6), 109–138. https://doi.org/10.3991/ijep.v14i6.43927

Ebekozien, A., Aigbavboa, C., & Aliu, J. (2023). Built environment academics for 21st-century world of teaching: Stakeholders' perspective. International Journal of Building Pathology and Adaptation, 41(6), 119–138. https://doi.org/10.1108/IJBPA-04-2022-0062

Geng, L., Ma, M., Osei-Kyei, R., Jin, X., & Shrestha, S. (2025). A review of employability skills for graduates in the construction sector. Higher Education, Skills and Work-Based Learning, 15(7), 153–170. https://doi.org/10.1108/HESWBL-08-2024-0242

Ghanbaripour, A. N., Talebian, N., Miller, D., Tumpa, R. J., Zhang, W., Golmoradi, M., & Skitmore, M. (2024). A systematic review of the impact of emerging technologies on student learning, engagement, and employability in built environment education. Buildings, 14(9), 2769. https://doi.org/10.3390/buildings14092769

Goel, A. (2025). Construction management students’ perception of BIM adoption and its implications in a non-mandated country. International Journal of Construction Management, 25(3), 278–288. https://doi.org/10.1080/15623599.2024.2317038

Hagan, D. E., Aryanti, T., & Ilhamdaniah, I. (2025). Digital competencies among construction students in Ghana's technical universities: A quantitative assessment from the students’ perspective. TEKNIK, 46(3), 255–269. https://doi.org/10.14710/teknik.v46i3.68465

Hajirasouli, A., Banihashemi, S., Sanders, P., & Rahimian, F. (2024). BIM-enabled virtual reality (VR)-based pedagogical framework in architectural design studios. Smart and Sustainable Built Environment, 13(6), 1490–1510. https://doi.org/10.1108/SASBE-07-2022-0149

Jayathilaka, R. D. W. W., Wijewickrama, M. K. C. S., & Edwards, D. J. (2025). Developing a holistic teaching and learning framework for construction management education: A systematic literature review. Engineering, Construction and Architectural Management, 32(13), 258–284. https://doi.org/10.1108/ECAM-11-2024-1557

Kong, F. (2024). Research on the construction of civil engineering curricula and the training model for innovative talents based on BIM technology. Pacific International Journal, 7(6), 206–211. https://doi.org/10.55014/pij.v7i6.736

Kuncoro, T., Ichwanto, M. A., & Muhammad, D. F. (2023). VR-based learning media of earthquake-resistant construction for civil engineering students. Sustainability, 15(5), 4282. https://doi.org/10.3390/su15054282

Luengo, A. D., Cabello, P., & Rodriguez, M. B. B. (2024). Online collaborative problem-solving as a tangible outcome of digital skills in technical and vocational higher education. Computers & Education, 218, 105079. https://doi.org/10.1016/j.compedu.2024.105079

Olowa, T., Witt, E., & Lill, I. (2023). Building information modelling (BIM)-enabled construction education: Teaching project cash flow concepts. International Journal of Construction Management, 23(9), 1494–1505. https://doi.org/10.1080/15623599.2021.1979300

Patching, A., Skitmore, M., Rusch, R., & Lester, D. (2024). Case study of the collaborative design of an integrated BIM, IPD and Lean university education program. International Journal of Construction Management, 24(7), 799–808. https://doi.org/10.1080/15623599.2023.2215107

Valbuena, B. C., Lozano, R. N. E., Serrano, S. A., & Granados, L. C. (2024). CAMPUS: A mobile app for construction processes learning and teaching in higher education. Computer Applications in Engineering Education, 32(4), e22739. https://doi.org/10.1002/cae.22739

Wang, L., Huang, M., Zhang, X., Yan, X., Jin, R., Wanatowski, D., Cheshmehzangi, A., & Chohan, N. (2023). Incorporating BIM into the upper-division curriculum of construction engineering and management. European Journal of Engineering Education, 48(3), 482–501. https://doi.org/10.1080/03043797.2022.2112150

Published

2026-11-12

How to Cite

Multidimensional assessment of technological capabilities for project management through building information modeling. (2026). Revista científica Olimpia, 24(1), 614-634. https://revistas.udg.co.cu/index.php/olimpia/article/view/6139